CID –A-A-96A
2.6 Cleaning Performance.
2.6.2 Test Procedure. Soil mixture is stirred constantly during application to panels, using a paint brush, aplly soil to the test panels in a thin film. Bake panels in a horizontal position for 20 minutes at 218oC – 232oC (425oF0- 450oF) after panels have cooled to room temperature, place them in a horizontal position. Apply aerosol oven cleaner to the soiled panels until the cleaner completely covers the surface of the panels. Allow panels to set for 30 minutes in a horizontal position at room temperature. Damp sponge lightly and flush with water to remove the soil. Dry panels and apply aerosol oven cleaner again and repeat the procedure. After damp sponging and flushing with water, the oven cleaner shall, by visual observation, completely remove all the soil on the panel and leave no visible film.
3. Product Conformance. The products provided shall conform to the producer’s own drawings, specifications, standards, and quality assurance practices and be the same product offered for sale in the commercial market. The government reserves the right to require proof of such conformance prior to first delivery and thereafter as may be otherwise provided for under the provisions of the contract.
ASTM standards are available from the American Society for Testing and Materials, 100 Barr Harbor Drive, West Conshohocken, PA 19428-2959.
NOTE: The contractor may use his normal quality assurance procedures for manufacture of this product; however, should a disagreement arise between the Government and its customer or between the Government and the manufacturer concerning compliance to the salient characteristics of this commercial item description, the test methods and tests stated in this commercial item description will be used to determine compliance of the product.
PREPARING ACTIVITY:
GSA-FSS
FSC 7930
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business